Dual Head Systems

| i!mensio Base | i!mensio Compact | i!mensio Mono | i!mensio Smart | L20E |

The i!mensio Strip Thickness Gauging System is a non-contact traversing system and has been designed for fast-moving steel / metal strips, especially in cold rolling mills. In the strip processing lines the system is used to check the thickness of the material before and after the process, in order to provide default values for the process control.

  • i!mensio Base

    i!mensio Base

    Non-Contact Thickness Gauging System for metal stripes with two triangulation lasers. Laser based function principle. Up to 5 measuring tracks representable via controller.

    Precision sensors with wide measuring point

    In-situ calibration meas. range 20 ± 10 m

  • i!mensio Compact

    i!mensio Compact

    Non-Contact Thickness Gauging System for metal strips, laser based function principle
    (Laser triangulation).

    Traversing thickness measuring with integrated guiding, fully automated calibration routine.

    Measuring area 6 mm Sheet thickness (standard),

    traversing range: 150, 300 or 450 mm.

  • i!mensio Mono

    i!mensio Mono

    NEW FUNCTION: Micro traversing

    Non-Contact Thickness Gauging System for metal stripes with two triangulation lasers,
    laser based function principle (Laser triangulation).

    Traversing thickness measuring fully automated calibration routine.

    Resolution of sensors 0,05 µm, measuring frequency up to 50 kHz,
    wide measuring spot 50 x 2.000 µm, especially for metalic surfaces.

    Traversing depending on application: 300, 500, 800 or 1100 m.

  • i!mensio Smart

    i!mensio Smart

    Non-Contact Thickness Gauging System for metal stripes with two triangulation lasers, laser based function principle (Laser triangulation).

    Traversing thickness measuring fully automated calibration routine.

    Resolution of sensors 0,05 µm, measuring frequency up to 50 kHz.

    Wide measuring spot especially for metalic surfaces.

    Traversing depending on application: 150, 300 or 450 mm.

  • L20E

    Non-Contact Thickness Gauging System for Metals and Non metal materials.

    Laser based function principle,

    up to 3 measuring tracks representable via controller.

To top