E20
| Modular Units R1000 |
- Single probe air gap tolerant double sheet detector of ferrous materials
- No force after measurement
- Exchangeable sensors for sheet thickness from 0.1 to 12 mm.
- Optional: Version 4P allows the connection of up to four double blank sensors
- Calibration without sheet samples
- Digital display of sheet thickness and operations parameter
- Programmable for 255 different sheet thicknesses
- Monitoring of over gauge and under gauge limits
- Monitoring of operating voltage and measurement time
- PLC interface
- Optional fieldbus interfaces: Profibus, DeviceNet, ControlNet, Interbus, CANopen, ProfiNet, CC-Link, EtherCAT, EtherNet/IP
- Selectable interfaces:
Data communication via optional opto coupled RS 232 interface (download)
Relay or opto coupled output for under gauge, nominal gauge, over gauge, and enable - Optional: Wall enclosure (IP65) or front panel mounting
- E20-B-R, E20-B-O, E20-C-O, E20-PR*-S: for the connection of one sensor
- E20-4P-B-R, E20-4P-B-O, E20-4P-C-O, E20-4P-PR*-S: for the connection from up to 4 sensors
* among Profibus all common fieldbus systems are available
Technology: | Electro magnetic | |
Sensor: | P42AGS | P128GPPS |
Meas.range: | ||
Steel magn. [FE] | 0.1 ... 4 mm | 1 ... 12 mm |
Aluminum [NF] | -- | -- |
Stainl. steel aust. Aust.[NF] | -- | -- |
Non-metals | -- | -- |
Air gap: | 0 mm | 0 mm |
Meas.time: | 80 ms (at 4 mm Steel) | 1.15 s (at 12 mm Steel) |
Application: | Double Sheet Detection in vacuum destacker, robot loader, press feeder |
Material + thickness: | Steel: 0.1 ... 12 mm |
Meas. method: | Single side Double Sheet Detection |
Function principle: | Electromagnetic double sheet sensor |
Programs: | 255 measurement programs possible |
Particularities: | Linearized air gap tolerant double sheet sensors |
Up to four double sheet sensors of the same type can be connected (Version 4P) | |
Short measurement cycles | |
Wall enclosure or front panel mounting | |
Note | Information on other sensors are documented in the manual. |